Setting The Speaker Distance - Denon AVR-1404/484 Mode D'emploi

Setting the speaker distance

Input the distances from the listening position to the speakers and set the surround delay time.
Preparations:
Measure the distances from the listening position to the speakers (L1 to L3 on the diagram at the right).
L : Distance from center speaker to listening position
1
L : Distance from front speakers to listening position
2
L : Distance from surround speakers to listening position
3
CAUTION:
Set the center speaker at the same distance from the front speakers (left and right) or the subwoofer,
or so that the difference in distance (L2 – L1) is 5 feet or less.
Set the surround speakers (left and right) at the same distance from the front speakers (left and right)
or the subwoofer, or so that the difference in distance (L2 – L3) is 15 feet or less.
1
NOTE:
• The speaker distance can be adjusted between 0 and 60 feet in steps of 1 foot.
2
NOTE:
• No setting when "None" has been selected for the center speaker.
3
NOTE:
• No setting when "None" has been selected for the surround speakers.
Use the (left) and (right) buttons to set the distance from the front speakers and subwoofer to the
listening position.
6 FRNT/SW
• The number changes in units of 1 foot each time one of the buttons is pressed. Select the value closest
to the measured distance.
("/SW" appears only when subwoofer = yes.)
Press the ENTER or (down) button to switch to the center speaker setting.
Use the (left) and (right) buttons to set the distance from the center speaker to the listening position.
7 CENTER
• The number changes in units of 1 foot each time one of the buttons is pressed. Select the value closest
to the measured distance.
Press the ENTER or (down) button to switch to the surround speakers setting.
Use the (left) and (right) buttons to set the distance from the surround speakers to the listening
position.
8 SURR.
• The number changes in units of 1 foot each time one of the buttons is pressed. Select the value closest
to the measured distance.
Press the ENTER or (down) button to enter the setting and switch the DIGITAL input (COAX) setting.
FL
L
2
SL
12ft
12ft
10ft
ENGLISH
Center FR
L
1
Listening
position
L
3
SR
19