Connecting The Antenna Terminals - Denon AVR-1404/484 Mode D'emploi

ENGLISH

Connecting the antenna terminals

FM INDOOR
ANTENNA
(An Accessory)
AM loop antenna assembly
1 2
Remove the vinyl tie
and take out the
connection line.
4
a. With the antenna
on top any stable
surface.
Mount
b. With the antenna
attached to a
wall.
Installation hole
Mount on wall, etc.
12
DIRECTION OF
BROADCASTING
STATION
FM ANTENNA
75 Ω/ohms
COAXIAL
CABLE
Connect to the AM
antenna terminals.
3
Bend in the reverse
direction.
AM LOOP
ANTENNA
(An Accessory)
AM OUTDOOR
ANTENNA
GROUND
Connection of AM antennas
1. Push the lever. 2. Insert the
conductor.
Note to CATV system installer:
This reminder is provided to call the CATV system installer's
attention to Article 820-40 of the NEC which provides guidelines
for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building,
as close to the point of cable entry as practical.
Notes:
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not disconnect the AM
loop antenna.
• Make sure AM loop antenna lead terminals do not touch metal
parts of the panel.
3. Return the lever.