Connections; Connecting The Antenna Terminals - Denon UT-1500AE Mode D'emploi

Connections

Connecting the antenna terminals

Direction of
broadcast station
75 Ω/ohms
COAXIAL cable
FM indoor antenna
(Supplied)
Use tape or a pin to fasten
the tip of the antenna to the
wall, a rack, etc.
2 AM loop antenna assembly
1 2
Remove the vinyl tie
and take out the
connection line.
4
a. Antenna placed on
a stable surface.
Mount
b. Hanging the
antenna on a wall.
Use the installation hole to secure the antenna to a wall, etc.
FM outdoor antenna
AM outdoor antenna
Ground
Connect to the AM
antenna terminals.
3
Bend in the reverse
direction.
6
ENGLISH
AM loop antenna
(Supplied)
Connection of AM antennas
q Push the lever. w Insert the conductor.
NOTE:
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not disconnect
the AM loop antenna.
• Make sure the AM loop antenna lead terminals do not
touch metal parts of the panel.
ENGLISH
e Return the lever.