Denon AVR-1404/484 Mode D'emploi page 32

ENGLISH
• After adjusting using the test tones, adjust the channel levels either according to the playback sources or to suit your tastes, as (described)
below.
1 Select the speaker whose level you want to adjust.
(Main unit)
The channel switches as shown below each time the button
is pressed.
FL
NOTE: Please make sure the "AUDIO" position of the slide
switch on the remote control unit.
2 Adjust the level of the selected speaker.
(Main unit)
Only adjustable when the
channel is selected with the
CH VOL buttons on the main
unit.
Default setting of channel level is 0 dB.
The level of the selected speaker can be adjusted within
the range of +12 to –12 dB using the SELECT knob or
cursor buttons.
32
(Remote control unit)
CNTR FR SR SL
SW
(Remote control unit)
2
1
2
2 1