Denon AVR-1404/484 Mode D'emploi page 33

Dolby Surround Pro Logic
1
Select the function to which the component you want to play
is connected.
Example: DVD
(Main unit)
2 Select the Dolby Surround Pro Logic II mode.
(Main unit)
• The Dolby Pro Logic indicator lights.
Display
3
Play a program source with the
• For operating instructions, refer to the manuals of the
respective components.
4 Select the surround parameter mode.
(Main unit) (Remote control unit)
To perform this operation from the remote control unit,
check that the mode selector switch is set to "AUDIO".
5 Select the optimum mode for the source.
(Main unit)
MODE DOLBY PL
or
II mode
(Remote control unit)
(Remote control unit)
Light
mark.
Display
MODE cinema
(Remote control unit)
MODE cinema MODE music
or
1 2
2
1
5, 7
6 Set the surround parameters according to the mode.
(Main unit)
• The mode switches as shown below each time the button
is pressed.
MODE Dolby PL
CINEMA EQ
DEFAULT
ENGLISH
4, 6 5, 7
The Dolby Surround Pro Logic II
Cinema or Music mode can be
chosen directly by pressing the
CINEMA or MUSIC button on
the remote control unit during
playback in the Dolby Surround
Pro Logic II mode.
4, 6
5, 7
(Remote control unit)
MODE CINEMA MODE MUSIC
CINEMA EQ PANORAMA
DEFAULT DIMENSION
CENTER WIDTH
DEFAULT
33