Marker Setup Screen; Black Level Setting; Virtual Surround - Denon DVM-2815 Mode D'emploi

PLAYING A DISC
1
Press the DISPLAY button during playback, the cur-
rent Track will be displayed on the TV screen.
• The elapsed and remaining playing time of the current
track will be displayed.
2 Press the DISPLAY button again to show current Total
Track.
• The elapsed and remaining playing time of the disc will be
displayed.
3
Press the DISPLAY button the third time to remove the
display.
1 Press the DISPLAY button during playback, the cur-
rent Track will be displayed on the TV screen.
• The file name of the current track will be displayed.
2
Press the DISPLAY button again to show current Total
Track.
• The elapsed playing time of the current disc will be dis-
played.
3 Press the DISPLAY button the third time to remove the
display.
You can check information about the current disc by pressing the
DISPLAY button on the remote control.
1 Press the DISPLAY button during
playback to show current Track.
• The elapsed and remaining playing
time of the current track will be dis-
played.
2
Press the DISPLAY button again
to show current Group.
• The elapsed and remaining playing
time of the current group will be
displayed.
3 Press the DISPLAY button the third time.
• The BIT RATE and the current repeat setting will be dis-
played.
• If you are playing a dual layered disc, the layer number will
also be displayed (L0: Layer 0 is playing. L1: Layer 1 is
playing).
4
Press the DISPLAY button the fourth time to remove the
display.

Marker Setup Screen

DVD-A
Use markers to memorise your favourite places on a disc.
1 Press the SEARCH MODE but-
ton four times (CD, VCD: three
times) during playback.
• The display screen and Markers will
appear on the TV screen.
2 Press the s or B button to
select 1, 2, 3, 4, 5, 6, 7, 8, 9, or 10 and ensure that "-
: - - : - -" appears in the display.
3 When reaches the desired point, press the ENTER
button.
• The Title or Track and elapsed playing time will appear
in the TV screen.
4 To return to the Marker later, press the SEARCH
MODE button four times (CD, VCD: three times) dur-
ing playback and the s or B button to choose the
desired marker, then press the ENTER button.
CD VCD
MP3 JPEG WMA
DVD-A
IIII
T
DVD-V CD VCD
1 2 3 4 5 6 7 8 9 10 AC
-- -- : -- : --
DVD
NOTES:
• Opening the disc tray or turning off the power or select
2
AC at step
all Markers.
• To clear a marker, using the s or B button, position
the cursor on to the marker number to be cleared and
press the CLEAR button.
• You can mark up to 10 points.
5 Press the SEARCH MODE or RETURN button to
exit.

Black Level Setting

Adjust the Black Level Settings to make
the black parts of the picture as bright as you preferred.
1
Press the MODE button during playback.
2
Press the ENTER button to switch
ON/OFF.
ON (Default) : Makes the dark
parts brighter.
OFF : Shows the original picture
as recorded.
3 Press the MODE or RETURN button to exit.

Virtual Surround

You can enjoy stereophonic visual space on your existing 2
channel stereo system.
1
Press the MODE button twice
during playback.
2
Press the ENTER button to set
it 1(Natural effect), 2(Emphasized effect) or OFF.
3
Press the RETURN button to exit.
1
Press the MODE button during playback.
2
Press the ENTER button to set 1(Natural effect),
2(Emphasized effect) or OFF.
3 Press the RETURN button to exit.
NOTES
:
• Select Virtual Surround OFF or adjust the volume down
if the sound is distorted.
• When MULTI CHANNEL is selected as the audio chan-
nel in the audio setting of the setup menu, Virtual
Surround does not function. Details are on page 26.
– 24 –
and press the ENTER button will erase
DVD-A DVD-V
ON
DVD-A DVD-V
OFF
CD MP3
VCD
VCD
WMA
EN