Playing Music Files Stored On The Computer; (Music Server); Playing Music Files That Have Been Preset Or Registered In Your Favorites; Operating The Avr-4806 Using A Browser - Denon AVR-4806 Mode D'emploi

ENGLISH
Network Audio Function
<FUNCTION> ENTER
D H F G
ENTER
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit

Playing music files stored on the computer

(music server)

The necessary system connections and settings must be made in
order to play music files.
This procedure is used to play music files (in WMA, MP3 and WAV
format) stored on computers (music servers) connected to the AVR-
4806 via the network.
The computer's server program must be launched before using this
function. For details, refer to the server program's operating
instructions.
< FUNCTION >
1
Use
[ AUX ]
(AMP mode).
2 D D H H
Press
(music server) on which the music file you want to
play is located, then press
3
D D H H
Press
folder, then press
Playable music files are indicated by the "
them.
[AUX]
4 D D H H
Press
D H F G
G G
or .
• Connection starts, and playback starts once the buffer reaches
"100 %".
Press H H to select the next file, D D to select the previous file.
During playback, press ENTER once to pause playback, then press
ENTER again to resume playback.
If ENTER is pressed and held in for more than 2 seconds when in
the play or pause mode, playback stops and the previous menu
screen reappears.
to select "NetAudio" or press
to select the host name of the computer
G G
ENTER
or .
to select the search item or the desired
G G
ENTER
or .
∗
" mark in front of
ENTER
to select the music file, then press
2
13
ENGLISH
Network Audio Function
Playing music files that have been preset or
registered in your favorites
The same operations as for Internet radio stations can be used to
preset music files or register them in your favorites and play them.
NOTE:
• Registered presettings are deleted when they are overwritten.
• When the operations describe below are performed, the music
server database is updated and it may no longer be possible to
play the music files that have been preset or registered in your
favorites:
• When the music server is stopped and restarted.
• When music files are deleted from or added to the music
server.
• When using an ESCIENT server, place "ESCIENT" before the
server name.

Operating the AVR-4806 using a browser

Internet Explorer can be used on the computer connected to the AVR-
4806 over the network to operate the AVR-4806.
Check the AVR-4806's IP address ( page 5, 6) beforehand and
input this IP address in Internet Explorer to display the AVR-4806's
control panel.
Operate in the same way as with normal Internet browsing to control
the AVR-4806.