Setting The Clock - Teac SL-D920 Mode D'emploi

1
The clock can be set both when the power is on
and when the unit is in standby.
2
Press the CLOCK ADJ button for more than 2
seconds.
"12 H" or "24 H" blinks on the display. If you want to
change the clock display mode, press the . or
/ button.
< If no button is pressed for 10 seconds, clock setting
mode will end.
3
Press the CLOCK ADJ button again.
The "hour" value blinks.

Setting the Clock

CLOCK ADJ
4
Use the SKIP ( . / / ) buttons to set the
current hour.
5
Press the CLOCK ADJ button again.
The "minute" value blinks.
6
Use the SKIP ( . / / ) buttons to set the
current minute.
7
Press the CLOCK ADJ button again.
The clock starts.
27