Usb Connector; Battery Compartment - Teac SL-D920 Mode D'emploi

A PHONES
For private listening, connect the headphones
plug into this jack, and adjust the volume using the
VOLUME knob.
B

USB connector

This connector is for connecting USB memory that
contains MP3/WMA music files.
C AUX IN jack
You can connect a portable audio player to this jack.
Connect it to the audio output jack (LINE OUT or
PHONES) of the player using the included stereo mini-
plug cable.
When using the PHONES jack of an audio player, you
must also adjust the volume of that audio player or
you might hear no sound from this unit.
< Turning the volume of the audio player up too high
might cause the sound from this unit to be distorted.
In this case, reduce the volume of the audio player
until the distortion stops and then adjust the volume
level of this unit to a comfortable listening level.
D FM antenna
While in FM mode, tune in to an FM station and
extend the lead to find the best position for reception.
This antenna may need to be repositioned if you
move your unit to a new location.
E AC power cord
Plug the AC power cord into an AC outlet.
F

Battery compartment

This battery supplies backup power to the built-
in clock and memory when the unit is temporarily
disconnected from the AC outlet.
Battery installation
1. Loosen the fixing screw.
2. Push the other end of the cover to open the
compartment.
3. Insert a CR2032 lithium-ion battery with the positive
(+) side facing the cover.
4. Close the cover.
Battery replacement
If the clock begins to indicate the wrong time, replace
the battery with a new one.
Precautions concerning button-shaped batteries
< Be sure to insert the battery with the correct positive
(+) and negative (-) polarities.
< Do not heat or disassemble a battery and never
dispose of an old battery by throwing it in a fire.
9