Before Recording; Recording To Usb 1 - Teac SL-D920 Mode D'emploi

Before Recording

This unit can record from CDs, radio and the AUX IN jack
as MP3 files onto USB memory devices, .
CAUTION
< Do not disconnect the USB memory during recording.
Do not disconnect the power cord during recording.
Doing so could damage the products.
< When recording from the AUX IN, adjust the volume
of the external audio source to a suitable level before
recording.
If you do not, the recording quality might be poor.
Note
< A "RECORD" folder is made, and the recorded files are
saved in the following subfolders.
A CDRECE** , COPY_E** or LINE_I** folder is made for
each recording session.
File names are assigned automatically in a regular
sequence as shown in the following illustration.
"RECORD" (root)
CDRECE01 (from an audio CD)
FILE_001.MP3
FILE_002.MP3
FILE_003.MP3
CDRECE02
FILE_001.MP3
FILE_002.MP3
FILE_003.MP3
LINE_I01 (from radio or AUX IN)
FILE_001.MP3
FILE_002.MP3
FILE_003.MP3
LINE_I02
COPY_E01 (from an MP3/WMA disc)
< Before recording check the remaining capacity of the
USB memory device using a computer.
You cannot check the remaining memory capacity with
this unit.
< This unit can record up to 999 files in each folder.
Up to 99 files can be made by this unit.
< USB storage devices with capacities of up to 4 GB can
be used with this unit.

Recording to USB 1

FUNCTION
RECORD
You can record a CD, a radio broadcast or from an external
device as MP3 files onto a USB memory device.
1
Connect the USB memory device to the USB port
of the unit.
2
Select the source to be recorded (CD, AM, FM, or
AUX).
< When the source is radio, tune in to a radio station you
want to record. (page 21)
< When the source is your external input device, play the
source you want to record. (page 24)
In this case, the recording level (recording volume) is
determined by the output volume of your external
input device and thus you cannot adjust the recording
level using this unit. To adjust the recording volume to
the appropriate level, try recording first as a test.
< If you want to record CD tracks in a programmed
order, program the order of CD tracks as shown in
page 18 and then press the STOP(H) button. (The
MEMORY indicator comes on.)
3
Press the RECORD button to start recording.
< The recording level (recording volume) is fixed at a
certain level except when an external input device is
used for recording.
< When the source is a CD, playback and recording start
automatically when the RECORD button is pressed.
25