Program Playback - Teac SL-D920 Mode D'emploi

2
3
Up to 32 tracks/files can be programmed in the desired
order.
Shuf f le and Intro functions do not work during
programmed playback.
1
Press the FUNCTION button to select "CD" or
"USB".
2
Press the PROGRAM button.
"MEMORY" and the programmed number blink on
the display.
< To cancel programmed playback mode, press the
STOP (H) button.
18

Program Playback

3
1
< MP3/WMA files not stored in folders are treated as
4
5
< Skip this step when playing an ordinary CD.
4
< Repeat steps
< You can program up to 32 tracks/files.
< To cancel programming af ter P01 has been
5
< When the playback of all the programmed tracks/files
P r e s s t h e M P3/ W M A F O L D E R b u t t o n s
repeatedly to select a folder on an MP3/WMA
disc or USB memory.
being in the "001" (root) folder.
Press a SKIP (. or /) button repeatedly to
select a track/file, and then press the PROGRAM
button.
The track/file is programmed, and "P02" is shown.
3 4
and to program more tracks/files.
programmed, press the STOP(H) button twice.
When you are done adding tracks/files to the
program, press the PLAY/PAUSE (G/J) button
to start programmed playback.
has finished, or the STOP button is pressed twice, the
MEMORY indicator will disappear and programmed
playback mode will be ended.
The program is retained in memory until you
open the disc compartment cover or the power is
interrupted. You can return to programmed playback
by pressing the PROGRAM button and the PLAY/
PAUSE (G/J) button.
This unit can record from CDs onto USB memory
devices in a programmed order.
For detailed information on how to record, see page
25.