Initial Commissioning; Select Language - Bosch TPA 200 Notice Originale

4.

Initial Commissioning

4.1

Select language

1. Switch on the TPA 200.
 Main Menu
is displayed.

Check
is displayed.
2. Select "Settings" with
with .
 General
is displayed.
3. Confirm with .
 Language
is displayed.
4. Confirm with .
 English
is displayed.
5. Select the desired language with
confirm with .
 The selected language is displayed.
6. Select "<Back" twice with
firm with to get into the main menu.
4.2 Installing TPA Startcenter
1. End all open applications.
2. Insert the CD with "TPA Startcenter" PC
software in the DVD drive.
3. Start "Windows Explorer".
4. Start 'D:\SETUP.EXE' (D = letter for DVD
drive).
 Set-up is started.
5. Select <Install>
6. Heed and follow the instructions on the
screen.
"
Following successful installation the "TPA
Startcenter" application starts automatically.
i
If several users at one PC/laptop want to
read the saved measured values or save new
measured values, each individual user must
install the "TPA Startcenter" software.
Robert Bosch GmbH
Initial Commissioning | TPA 200 | 23
or and confirm
or and
or and con-
4.3 TPA 200 update
The software can be updated. Updates are
available on the TPA website.
1. Logon to the TPA website
http://bit.ly/bosch-tpa-startcenter
2. Update the software if a new update is
available.
i
The software update updates the vehicle
database in the TPA 200.
i
Additional information on updating TPA 200
can be found in the online help for the TPA
Startcenter.
1 689 989 200
en
|
2019-12-24