Function Of The Keys; Switching Off - Bosch TPA 200 Notice Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 84
en
22 | TPA 200 | Product Description
3.5.2

Function of the keys

Key
Function
R Selection key for operating selection lists
(when the selection key is held pressed,
it causes the selection list to run quickly).
R Selection of numbers or letters (e.g.
when the order number or license num-
ber is entered)
R On/Off key
R Function key for menu selection
R During vehicle identification you can re-
turn again to the main menu, if the func-
tion key is held pressed.
R Selection key for operating selection lists
(when the selection key is held pressed,
it causes the selection list to run quickly).
R Selection of numbers or letters (e.g.
when the order number or license num-
ber is entered)
3.6
On/Off key
3.6.1
Switching on
Press
.
 The software version is shown in the dis-
play.
 The main menu appears.
"
The TPA 200 is ready for operation.
3.6.2

Switching off

1. Select " Disabled" with
with
.
Goodbye
is displayed.
"
The TPA 200 is switched off.
i
The TPA 200 switches itself off automatically
after five minutes if not used.
3.7
Charging the internal storage
battery
The internal storage battery of the TPA 200 is
charged from a PC/laptop via the supplied USB
connecting cable. If the storage battery is fully
run down, the charging time sis approx. 2.5
hours. The TPA 200 cannot be operated during
charging.
i
Alternatively power supply units (over
500 mA) with a plug and USB port can be
used for charging the storage battery.
|
1 689 989 200
2019-12-24
or
and confirm
3.8
Positioning the TPA 200 on
the wheel
To read out the tire pressure sensor data,
TPA 200 must be kept close to the tire valve (up
to maximum 5 centimeters distance). TPA 200
do not place on the mount on the rim, as this
can interfere with radio transmission between
TPA 200 and the tire pressure sensor.
OK
Fig. 2:
Positioning the TPA 200 on the wheel
i
Move the TPA 200 into different position in
relation to the tire valve if the tire pressure
sensor data cannot be read out.
Robert Bosch GmbH

Publicité

Chapitres

Table des Matières
loading

Table des Matières