Philips PulseRelief PR3840 Mode D'emploi page 35

Problem Possible
cause
I experienced You did not
an unpleasant end the
sensation treatment in
when I the app or
touched the did not press
connectors the on/off
of the device button on
or the the device
electrodes. before you
removed the
device.
The The intensity
treatment is too high or
feels different too low.
or less
pleasant than
usual.
The
electrodes
are not in the
right place.
The
electrodes
are not
properly
attached.
The
electrodes
are too dirty.
Solution
Always end the treatment in the app
or press the on/off button on the
device before you remove the device
from your skin. In this way, you avoid
the unpleasant sensation when you
touch the connectors of the device or
touch the electrodes. This sensation is
unpleasant but not harmful.
On the program settings screen in the
app, tap + or - to increase or decrease
the intensity. You can also choose a
different treatment program.
Switch off the device and detach it
from the electrodes. Remove the
electrodes from the skin and move
them to a slightly different place.
Switch off the device and detach it
from the electrodes. Check if the
electrodes are attached to the skin
properly.
You can try to clean the electrodes
(see chapter 'Cleaning'). If this does not
help, replace the electrodes.
ENGLISH
35