Product Overview (Fig. 1); Preparing For Use - Philips PulseRelief PR3840 Mode D'emploi

ENGLISH
22

Product overview (Fig. 1)

1 On/off button
2 Status indicator
3 Detachable connector
4 Micro-USB socket of device
5 Battery indicator
6 Adapter
7 Socket for standard USB plug
8 Standard USB plug
9 Micro-USB plug
10 Self-adhesive hydrogel electrodes

Preparing for use

Charging the device
To be able to use the device, you first have to
charge it. Charging the device takes approx. 5 hours
at room temperature. When the rechargeable
battery is fully charged, it contains sufficient energy
for approx. 8 hours of continuous use under normal
operating conditions.
Note: If the device is not fully charged when you start
a treatment, the battery may run out during the
treatment. We advise you to always fully charge the
device before you start a treatment.
Note: Treatment is not possible when the device is
charging.
1 Unplug the cable that connects the two units
from the micro-USB socket of the device unit
with the battery indicator.