Philips PulseRelief PR3840 Mode D'emploi page 27

, If you do not start the treatment within 5 minutes,
the device switches off automatically.
If this happens, you first have to press the
on/off button again to start a treatment.
3 Open the Philips Treatment App.
4 The app automatically selects PulseRelief if only
a PulseRelief device is paired to the app. If both
a PulseRelief and a BlueTouch device are paired
to the app, tap 'PulseRelief' to select the device.
Selecting a treatment area
At first-time use, you always have to select a
treatment area. If you have used the device before,
you can choose between 'My previous treatment'
to repeat the previous treatment, or 'Select new
treatment' to start a different treatment.
1 Rotate the body animation on the screen.
2 Tap on one of the suggested locations for the
electrodes to select the area you want to treat.
Rating your pain intensity
1 Swipe vertically to rate the intensity of your
pain on a scale from 0 to 10. If you experience
no pain tap 0 and if you experience the worst
pain ever tap 10. If your pain is somewhere
in between, rate it by tapping the appropriate
number.
Note: The pain intensity you indicate is not used by the app
to determine the intensity of the treatment. The rating is
only stored in your treatment diary. You can switch off this
feature in the settings tab of the app.
ENGLISH
27