Troubleshooting - Scheppach PES31 Traduction Des Instructions D'origine

Old devices must not be disposed of with household waste!
This symbol indicates that this product must not be disposed of together with domestic waste in compliance with
the Directive (2012/19/EU) pertaining to waste electrical and electronic equipment (WEEE). This product must be
handed over at the intended collection point. This can be done, for example, by returning it when purchasing a
similar product or delivering it to an authorised collection point for the recycling of old electrical and electronic de-
vices. Improper handling of waste equipment may have negative consequences for the environment and human health
due to potentially hazardous substances that are often contained in electrical and electronic equipment. By properly
disposing of this product, you are also contributing to the effective use of natural resources. You can obtain information
on collection points for waste equipment from your municipal administration, public waste disposal authority, an author-
ised body for the disposal of waste electrical and electronic equipment or your waste disposal company.

13. Troubleshooting

Problem Possible Cause
No electrical voltage to the machine.
The machine does The cross section of the extension cable is
not work. not large enough and/or the extension cable
is too long.
The mains voltage is lower than that speci-
fied.
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Action
Check the fuse, power cable and power plug
and have them replaced by qualified personnel if
necessary.
Use extension cables with larger cross sections
and/or use shorter extension cables.
Contact the power supply company if necessary.
GB | 23