Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1. Introduction
Manufacturer:
scheppach
Fabrikation von
Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new tool brings you much enjoyment
and success.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by
the product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
• A breakdown of the electrical system that occurs
due to the non-compliance of the electric regu-
lations and VDE regulations 0100, DIN 57113 /
VDE0113.
We recommend:
Read through the complete text in the operating in-
structions before installing and commissioning the
device.
The operating instructions are intended to help the
user to become familiar with the machine and take
advantage of its application possibilities in accord-
ance with the recommendations.
The operating instructions contain important infor-
mation on how to operate the machine safely, pro-
fessionally and economically, how to avoid danger,
costly repairs, reduce downtimes and how to in-
crease reliability and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula-
tions that apply for the operation of the machine in
your country.
Keep the operating instructions package with the
machine at all times and store it in a plastic cover to
protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
carefully follow its information. The machine can only
be operated by persons who were instructed con-
cerning the operation of the machine and who are in-
formed about the associated dangers. The minimum
age requirement must be complied with.
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
In addition to the safety instructions in this operating
manual and the separate regulations of your coun-
try, the generally recognised technical rules relating
to the operation of such machines must also be ob-
served.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description
1. ON/OFF switch
2. Lid (dust box)
3. Dust box
4. Delta sander plate
5. Speed selector
6. Orbital sander plate
7. Random orbital sander plate
8. Rubber pin
9. Screw
10. Suction adapter
11. Random orbital sanding sheet
12. Delta sanding sheet
13. Orbital sanding sheet
3. Scope of delivery
All in one sander
1x
1x Dust box
1x Delta sander plate (pre-mounted)
1x Orbital sander plate
1x Random orbital sander plate
8x Rubber pin (4x pre-mounted)
8x Screw (4x pre-mounted)
1x Suction adapter
1x Random orbital sanding sheet
1x Delta sanding sheet
Orbital sanding sheet
1x
Manual
1x
• Open the packaging and take out the machine
carefully.
• Remove
the
packaging
as
the
packaging
and
(if available).
• Check that the delivery is complete.
• Check the machine and accessory parts for trans-
port damage.
• If possible, store the packaging until the warranty
period has expired.
material
as
well
transport
bracing
GB | 17
Publicité
Chapitres
Table des Matières
