Beurer Janonh JFT 90 Mode D'emploi page 136

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 34
Non-contact fever thermometer JFT 90
GB
D
NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and
a.
land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted
theoretically with accuracy. To assess the electromagnetic environment due to fixed RF transmitters, an
electromagnetic site survey should be considered. If the measured field strength in the location in which
the JFT90 is used exceeds the applicable RF compliance level above, the JFT90 should be observed to
verify normal operation. If abnormal performance is observed, additional measures may be necessary,
such as re-orienting or relocating the JFT90.
Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 V/m.
b.
136

Publicité

Table des Matières
loading

Table des Matières