Accessories; Environment - Festool SYM 70 RE Notice D'utilisation D'origine

English
the diameter of the saw blade changed when
resharpening or a new saw blade is inserted.
► Set the stop rulers [6-4] to 0°.
► Loosen the locknut [6-1].
► Swivel the saw unit down all the way to the
stop.
► Turn the screw [6-2] to adjust the saw unit
as shown in the picture 7 (left-hand turn -
saw unit is lowered; right-hand turn - saw
unit is raised).
► Retighten the locknut [6-1].

10 Accessories

Use only original Festool accessories.
The PO numbers of the accessories and tools
can be found in the Festool catalogue or online
at "www.festool.co.uk".
In addition to the accessories described, Fes­
tool also provides a comprehensive range of
system accessories that allow you to use your
saw more effectively and in diverse applica­
tions, e.g.:
• Saw blades for different materials.

11 Environment

Do not dispose of the device in the
household waste! Recycle devices, ac­
cessories and packaging. Observe appli­
cable national regulations.
EU only: In accordance with European Directive
2002/96/EC on waste electrical and electronic
equipment and implementation in national law,
used power tools must be collected separately
and handed in for environmentally friendly re­
cycling.
Information on REACH: www.festool.com/reach
24