TechniSat DIGITRADIO 110 IRr Mode D'emploi page 16

Push Button
PIN
Enter Passkey
5. Setup wizard completed, press OK button to exit.
16
You must start the WPS scan on the remote station (e.g. router). Consult the
manual for your router or Access Points (AP) to learn how to do this.
After you have done this, press OK button on the radio and then both devices will
establish a connection.
The radio creates an 8-digit number, which you then have to enter into the remote
station.
After entering the PIN, press OK button to establish the connection between both
devices.
In addition to a WPS connection, you can also establish a connection using a Pre-
Shared-Key. The required key is often on the rear of the router, or you may have
defined it yourself.
This method is used automatically for networks without WPS. You can call up the
Pre-Shared-Key function on networks with WPS by selecting menu item "Enter
Passkey".
An input field should now appear. You can enter the required key (PSK) by pressing
buttons and press OK button, and then select "OK" and press OK button
complete the entry. The radio should now establish the connection to the network.