Secondary Service; Drc (Dynamic Range Control) Value - TechniSat DIGITRADIO 110 IRr Mode D'emploi

8.3 Secondary Service

You may see a ">>" symbol after the name of the station, this indicates that there are secondary services
available to that station. These secondary services contain extra services that are related to the primary station.
E.g. a sports station may want to add extra commentaries. The secondary services are inserted directly after the
primary station (a "<<" symbol is before the name of the station) in the station list.
To select the secondary station, press
OK button to select it.
When the secondary service ends, the unit will automatically switch back to the primary station.
8.4 Scanning Stations
Simply press SCAN button to scan for all available stations.
Alternatively, press MENU button, press
8.5 Prune Invalid
You may remove all unavailable stations from the station list.
1. Press MENU button, press
2. Press or button to select 'YES', and then press OK button to confirm.

8.6 DRC (Dynamic Range Control) value

You can set the compression level of stations to eliminate the differences in dynamic range or sound level
between radio stations.
1. Press MENU button, press
2. Press or button to select through 'DRC high', 'DRC low' or 'DRC off', press OK button to confirm.
30
or button until you find the secondary service you want, then press
or button to select 'Scan', and then press OK button to full scan.
or button to select 'Prune invalid', and then press OK button to confirm.
or button to select 'DRC', and then press OK button to confirm.