Hortensus 8FT Mode D'emploi page 14

Refer to TRAMPOLINE PARTS LIST for identification of parts.
WARNING:
Two adults in good physical condition are required for the following assembly. For your safety,
you should wear proper shoes and clothing.
Failure to follow these instructions and warnings may result in injury.
NOTE:
Picture may vary slightly with different trampoline models.
1. Lay out all the trampoline parts in groups,
shown above.
3. Attach all the top rails to form a large
circle. Jointing the last link may require
two people. The second person should
hold the opposite side, while you bring to
both ends of the circle together.
5. Attach the leg support to the top frame
and tightly secure together with the
screws.
TRAMPOLINE ASSEMBLY
2. Attach the leg extensions to a leg base
and secure together with the screws.
Repeat for all leg supports.
4. Attach the all leg supports you assembled
in STEP 2 to the top frame.
6. At this stage the trampoline should like
the picture above.