Installing The Hood - GE UVW8301 Manuel D'utilisation Et Instructions D'installation

INSTALLING THE HOOD

Remove the grease filters from
the unit and set aside. The
grease filters are removed by
pressing the handle in the front
of the filter. When replacing,
make sure that the filters are
properly positioned with the
handles in front and visible.
NOTE: On some models, the front panel covers the
filters and must be pulled down to access the filters.
NOTE: This bracket must be removed prior to
installation. Remove 2 front and 2 bottom screws per
illustration bellow.
16
Installation
1. Securely press the damper on top of the exhaust
opening. Check that the damper opens freely.
Attach damper to hood using machine screws
(J) provided.
2. Remove and properly discard the protective plastic
wrapping from the hood and grease filter. Remove
the template off the wall.
3. Mount the Range Hood:
Using 2 or more people, lift the range hood and
place on the hood mounting bracket. Make sure
the bracket fully engages the hood body.
Install the 2 mounting screws (D) or wood screws
(L) as needed into the designated holes on the
back panel.
49-2000895 Rev. 1