Installation Preparation; Product Dimensions; Installation Clearances - GE UVW8301 Manuel D'utilisation Et Instructions D'installation

PRODUCT DIMENSIONS

12-1/4
25-3/4
2-3/4
30
Grease Filters
(quantity may vary
by model)
12-7/8
30
49-2000895 Rev. 1

Installation Preparation

4-5/8
13-13/16
20
8
6-15/16
10-5/8
20

INSTALLATION CLEARANCES

These vent hoods are designed to be installed onto
a wall with no above cabinets.
24" Required Min.
36" Recommended Max.
The vent hood must be installed between the 24"
required minimum and 36" recommended maximum
above the cooking surface.
ceiling heights, see Installation Height Table.
NOTE: Installation height should be measured from
the cooking surface to the lowest part of the hood.
The hood must be installed onto a wall. It can be
vented to the outdoors, or it can be installed for
recirculating operation. For recirculation operation,
see Recirculation Install Planning.
Installation instructions, describing the intended
mounting and wiring of the range hood cord
connection kit, shall be provided with each range
hood cord connection kit.
For supplied duct cover
1" = 2.5 cm
9