Flooded Engine - Toro 51950A Manuel D'utilisation

READ THIS INFORMATION
����
Before you use your new trimmer/brushcutter, read the following help-
ful hints to get you started.
Fueling
1.
2.
3.
Cold Starting vs. Warm Starting
When you restart the trimmer/brushcutter and you are not sure whether the engine is still warm, set
the start lever to
pulls, refer to "To Start a Cold Engine" later in this manual.

Flooded Engine

Will the engine start? If not, it may be flooded. Relax, this is easy to correct. Set the start lever to
RUN
If the engine does not start, refer to "Troubleshooting" later in this manual or call toll-free at
1-866-574-9242 (US) or 1-866-574-9243 (Canada).
For questions concerning your
trimmer/brushcutter, call us toll free at
1-866-574-9242.
WARNING:
of California to cause cancer, birth defects, or other reproductive harm.
2
DANGER:
Gasoline is extremely flammable and explosive. A
fire or explosion from gasoline will burn you and
others.
Obtain a clean container that is approved for use with gasoline.
Mix all of the 2-cycle oil provided with 1 US gallon of 87-octane, unleaded
gasoline.
Fill the trimmer's gas tank carefully.
RUN
(Choke Open) and pull the starter cord. If the engine does not start within 5
(Choke Open). Squeeze the trigger and pull the starter cord quickly for 10 to 12 pulls.
The engine exhaust from this product contains chemicals known to the State
Printed in USA
All rights reserved