Preparation Using Milk - Siemens CT636LE Série Mode D'emploi

Preparation using milk

This fully automatic coffee machine has
an integrated beverage outlet� This can be
used to prepare coffee drinks with milk or
also milk froth and warm milk�
Risk of burns!
B
The beverage outlet gets very hot�
After use, always let it cool down
before you touch it�
Milk container
The milk container has been designed
especially for use together with this fully
automatic coffee machine� It is intended
solely for use in the household and for
storing milk in the refrigerator� The insulated
container keeps milk cool for a number of
hours�
Important: Remove cups or glasses
F
before opening the door in case they
fall�
Connecting the milk container or a milk
carton:
● Open the appliance door�
● Remove the cover of the beverage outlet
towards the front�
● Connect and fix the milk tubes and
connecting elements as illustrated�
● Attach the cover firmly from the front on
to the beverage outlet�
● Attach the suction pipe and insert into the
milk container or a milk carton�
● Close the appliance door�
F For optimal milk froth quality, use
cold milk with a fat content of at least
1�5 % if possible�
Dried milk residues are difficult to
F
remove, therefore always clean
(see the section "Cleaning the
milk system")�
Coffee drinks with milk
● Place a cup or glass underneath the
beverage outlet�
● Select "Espresso Macchiato",
" Cappuccino", "Latte Macchiato" or
"Caffe Latte" with the rotary selector�
The display shows the selected drink along
with the preset values for the strength of the
coffee and the amount for this drink�
The settings can be changed
F
as described in the section
"Drink adjustment"�
● Press C to start dispensing�
The milk is dispensed into the cup or glass
first. Then the coffee is brewed and runs
into the cup or glass�
Press button C again to stop the
current step of the process prematurely�
en
43