Siemens CT636LE Série Mode D'emploi page 58

en
Descaling
Takes about 21 minutes�
● Press button E�
● Turn the rotary selector to select
"Descale"�
● Press button C� Display indi-
cates progress of the programme�
● Empty drip trays and replace�
● Remove water filter(if there is one) and
press C�
● Pour lukewarm water into the empty
water tank up to the "0�5 l" mark and
then dissolve one Siemens descaling
tablet TZ80002 in it� For the TZ60002 you
should always dissolve two tablets�
If there is not enough descaling
F
solution in the water tank, you will
be asked to do the following� Refill
using uncarbonated water and press
C again�
● Remove the milk tube from the milk
container and fix the connecting part to
the right side of the beverage outlet with
the magnet�
● Close the appliance door�
● Place a container with a capacity of
0�5 litre under the beverage outlet�
● Put the end of the milk tube into the
container�
● Press button C� The descaling
programme will now run for about
19 minutes�
● Remove the container and press
C�
● Rinse the water tank and (if removed)
replace the water filter.
● Fill the tank with fresh water up to the
"max" indicator�
● Replace the water tank and close the
door�
● Place the container underneath the
beverage outlet again�
● Put the end of the milk tube into the
container�
54
● Press button C� The descaling
programme will now run for about
2 minutes and rinse the appliance�
● Remove the container, empty the drip
trays, replace and close the appliance
door�
● Press C� The appliance has
finished descaling and is ready for use
again�
● Press E to exit the program�
Cleaning
Takes about 5 minutes�
● Press button E�
● Turn the rotary selector to select "Clean"�
● Press button C� Display indi-
cates progress of the programme�
● Clean the beverage outlet and replace,
empty the drip trays and replace�
● Open the ground coffee drawer, drop in
a cleaning tablet and close the coffee
drawer again�
● Close the appliance door�
● Place a container with a capacity of
0�5 litre under the beverage outlet�
● Press button C� The cleaning
programme will now run for about
5 minutes�
● Remove the container, empty the drip
trays, replace and close the appliance
door�
● Press C� The appliance has
finished cleaning and is ready for use
again�
● Press E to exit the program�