Personalised Drinks - Siemens CT636LE Série Mode D'emploi

The settings can be changed
F
as described in the section
"Drink adjustment"�
● Press C to start dispensing�
● The message appears "Milk tube
removed from milk container?"�
● If still connected, remove the milk tube
and touch [ Yes ] on the display�
Hot water flows out of the beverage outlet.
Press button C again to stop the
procedure prematurely�

Personalised drinks

Press B to open the selection for
personalised drinks�
Up to 8 storage spaces can be used� Save
your favourite drinks that are frequently
dispensed here with all their settings�
F Press B to exit the menu
without saving at any time�
Entering or changing drinks
● Press B�
The selection of memory locations appears�
myCoffee 1
● Using the rotary selector, choose an
empty memory location (empty cup)
to make a new entry, or an occupied
memory location to change or delete a
favourite drink�
● At an empty memory location
[ Create beverage ] or an occupied
memory location [ Change beverage ]�
If [ Delete beverage ] is selected, the
F
settings for the memory location are
deleted and it is again empty�
Create beverage
The menu for adjusting the drinks opens�
The last drink dispensed is shown with the
last settings selected�
● If you do not wish to save last drink
dispensed, select another drink with the
rotary selector�
● Touch each setting to be changed and
adjust the values as desired with the
rotary selector�
Other setting options appear depending on
the selection�
● Touch [ Continue ] to make other settings�
F For milk drinks, the mixing ratio of
coffee and milk can be set�
● The settings can be stored under an
individual name� Touch [ Save name ].
The mask for entering the name opens�
3 4 5 6 7 8 9 ´ _ < A B C D E F G H I J K
A _ _ _ _ _ _ _ _ _
Cancel
● Using the rotary selector, select a letter or
a symbol in the upper row�
● Touch g to confirm the letter selected or
K to delete it�
● Select other letters or symbols and
confirm.
● Touch [ Cancel ] to exit the entry without
any modification and open the drinks
menu�
● With [ Save ] the entry is adopted� The
selection menu opens�
● Press B to exit the menu�
Select a personalised drink and
dispense
● Press B�
The selection of memory locations opens�
● Use the rotary selector to select the
desired memory location�
● Place a cup or glass underneath the
beverage outlet�
● Press C to start dispensing�
en
Save
45