Siemens CT636LE Série Mode D'emploi page 64

en
Problem
Brewing unit cannot be
inserted�
Protective cover of the
brewing unit cannot be
properly attached�
Display shows
"12:00"
Display shows
"Milk container connected?"
despite connected milk
container�
Display shows, for example:
"Fault: E0510"
Display shows
"Fill bean container"
although the container is
already full, or the grinder is
not grinding any beans�
Display shows
"Clean brewing unit"
60
Cause
Brewing unit is in the wrong
position�
Brewing unit is locked�
Brewing unit is not locked�
Power failure or appliance
switched off at mains�
Container is outside the range
of the sensor�
Material e�g� milk carton is not
recognised�
The appliance has a fault�
Beans are not falling into the
grinding unit (beans too oily)�
Brewing unit is soiled�
Too much ground coffee in
the brewing unit�
The mechanism of the
brewing unit is stiff�
Solution
Insert the brewing unit
according to the instructions,
see the section "Cleaning the
brewing unit"�
Unlock the brewing unit, see
the section "Cleaning the
brewing unit"�
Lock the brewing unit, see the
section "Cleaning the brewing
unit"�
Re-enter values; do not switch
the appliance off at the mains
or select the "Off" option in
the Clock display menu�
Position the container at the
right edge�
Confirm the display request
with "Yes" or use the enclosed
milk container�
Proceed according to the
display screen�
Gently tap the bean container�
Possibly change the type
of coffee� When the bean
container is empty, wipe it
with a dry cloth�
Clean the brewing unit�
Clean the brewing unit� Do
not place more than two level
measuring spoons of ground
coffee in the drawer�
Clean the brewing unit, see
the section "Care and daily
cleaning"�