Siemens CT636LE Série Mode D'emploi page 54

Masquer les pouces Voir aussi pour CT636LE Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

en
● Remove the ground coffee drawer, clean
under running water and dry well�
● Wipe and dry the inside of the appliance
(support, drip tray and the ground coffee
drawer) and collecting tray�
● Replace the dried parts, e.g. the ground
coffee drawer�
Do not put the following parts in
L
the dishwasher:
Accessory drawer, water tank, lid of the
water tank, beverage outlet cover, bean
container, lid of the bean container, metal
connecting element, ground coffee drawer,
protective cover of the brewing unit and the
milk container�
M
The following parts may be cleaned in
the dishwasher:
Drip tray, collecting tray, drip shelf, coffee
grounds container, milk tubes, individual
parts of the beverage outlet, measuring
spoon and individual parts of the milk
container lid�
If the appliance is cold when
F
switched on, or if it is switched off
after dispensing coffee, it rinses
automatically� The system is there-
fore self-cleaning�
Important: If the appliance is not
F
used for a lengthy period (e�g�
while you are on holiday), clean
the entire appliance thoroughly,
including the milk system, the ground
coffee drawer and the brewing unit
before use�
50
Cleaning the milk system
The milk system is automatically cleaned
with a short jet of steam directly after
preparing a milk drink�
Tip: For particularly thorough
F
cleaning, the milk system can
be additionally rinsed with water
(see the section "Rinsing the milk
system")�
F
Important: Clean the milk system
manually every week and, if
required, also more often (see the
section "Cleaning the milk system
manually")�
Risk of burns!
B
The beverage outlet gets very hot�
After use, always let it cool down
before you touch it�
Rinsing the milk system
● Press button E and select
"Rinse milk system" with the rotary
selector�
● Press C to start the
programme�
● Open the door and remove the milk tube
from the milk container�
● Fix the connecting element on the right of
the beverage outlet with the magnet�
● Close the door� Be careful not to jam the
milk tube�
● Place an empty glass under the beverage
outlet and put the end of the milk tube
into it�
● Press button C�
The milk system is rinsed with water�

Publicité

Table des Matières
loading

Table des Matières