Preparing Coffee Drinks; Preparation Using Milk - Siemens TE607F Serie Mode D'emploi

en

Preparing coffee drinks

The appliance must be ready for use�
● Place a prewarmed cup underneath the
beverage outlet 4�
● Touch the appropriate symbol to select
the desired drink, Espresso or Coffee�
The name of the drink and the currently
active values for strength and cup size are
shown in display�
Coffee
regular
You can change the cup size and
F
coffee strength by touching D and
H� If you select Ground coffee,
follow the procedure described under
"Preparation using ground coffee"�
For example:
● Touch D repeatedly until the display
shows large�
● Touch H repeatedly until the display
shows mild�
● Touch C to begin dispensing
the beverage�
The coffee is brewed and then dispensed
into the cup�
You can touch C again to
F
prematurely halt dispensing�
36
medium

Preparation using milk

This fully automatic coffee machine
possesses an integrated milk system that
enables you to prepare coffee with milk or
milk froth or warm milk alone�
Risk of burns!
B
The upper and lower sections of the
milk system 4b become extremely
hot� After use, always let them cool
down before you touch them�
F Caution!
Dried milk residues are difficult to
remove, so you should always clean
the appliance after each use (see the
section "Cleaning the milk system")�
F While milk is being prepared you
may hear a whistling sound� This is
due to the technical nature of the
milk system 4b�
Tip: For optimum milk froth use cold
F
milk with a fat content of at least
1�5%�
The appliance must be ready for use�
The milk tube and suction pipe must be
connected�
● Insert the suction pipe 4d into the milk
container�
● Place a prewarmed cup or glass under-
neath the beverage outlet�
Coffee-based drinks with milk
● Touch the appropriate symbol to select
Caffe Latte, Latte Macchiato or Cappuccino�
The name of the drink and the previously
specified values for strength and cup size
are shown in display�