Product Description And Specifications; Intended Use; Product Features - Bosch GBH Professional 2-24 RE Notice Originale

formed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
Service
Have your power tool serviced by a qualified repair
u
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
Hammer Safety Warnings
Wear ear protectors. Exposure to noise can cause hear-
u
ing loss.
Use auxiliary handle(s), if supplied with the tool. Loss
u
of control can cause personal injury.
Hold power tool by insulated gripping surfaces when
u
performing an operation where the cutting accessory
or fastener may contact hidden wiring or its own cord.
Cutting accessory and fasteners contacting a "live" wire
may make exposed metal parts of the power tool "live"
and could give the operator an electric shock.
Use suitable detectors to determine if utility lines are
u
hidden in the work area or call the local utility com-
pany for assistance. Contact with electric lines can lead
to fire and electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes property dam-
age or may cause an electric shock.
Always wait until the power tool has come to a com-
u
plete stop before placing it down. The application tool
can jam and cause you to lose control of the power tool.
Secure the workpiece. A workpiece clamped with
u
clamping devices or in a vice is held more secure than by
hand.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended Use

GBH 2-24 RE
The power tool is intended for hammer drilling in concrete,
brick and stone. It is also suitable for drilling without impact
in wood, metal, ceramic and plastic. Power tools with elec-
Bosch Power Tools
tronic control and clockwise/anti-clockwise rotation are also
suitable for screwdriving.
GBH 2-24 DRE/DFR
The power tool is intended for hammer drilling in concrete,
brick and stone, as well as light chiselling work. It is also suit-
able for drilling without impact in wood, metal, ceramic and
plastic. Power tools with electronic control and clockwise/
anti-clockwise rotation are also suitable for screwdriving.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Keyless quick-change chuck (GBH 2-24 DFR)
(2) SDS-plus quick-change chuck (GBH 2-24 DFR)
(3)
SDS-plus tool holder
(4)
Dust protection cap
(5)
Locking sleeve
(6) Locking ring for quick-change chuck (GBH 2-24
DFR)
(7)
Rotational direction switch
(8)
Lock-on button for on/off switch
(9)
On/off switch
(10)
Release button for impact/mode selector switch
(GBH 2-24 DRE, GBH 2-24 DFR)
(11) Impact/mode selector switch (GBH 2-24 DRE,
GBH 2-24 DFR)
(12)
Button for depth stop adjustment
(13)
Depth stop
(14)
Auxiliary handle (insulated gripping surface)
(15)
Release button for "drilling/hammer drilling" se-
lector switch (GBH 2-24 RE)
(16)
"Drilling/hammer drilling" selector switch (GBH
2-24 RE)
(17)
Handle (insulated gripping surface)
(18)
Securing screw for keyed chuck
(19)
A)
Keyed chuck
(20)
SDS-plus shank for drill chuck
(21) Drill chuck holder (GBH 2-24 DFR)
(22)
Front sleeve of the keyless quick-change chuck
(GBH 2-24 DFR)
(23)
Retaining ring of the keyless quick-change chuck
(GBH 2-24 DFR)
(24)
Dust extraction attachment suction opening
(25)
Dust extraction attachment clamping screw
(26)
Dust extraction attachment depth stop
(27)
Dust extraction attachment telescopic tube
(28)
Dust extraction attachment wing bolt
(29)
Dust extraction attachment guide tube
English | 7
A)
A)
A)
A)
A)
A)
A)
A)
1 609 92A 4VG | (24.01.2019)