Product Description And Specifications - Bosch GBM 350 Professional Notice Originale

All manuals and user guides at all-guides.com
OBJ_BUCH-2527-001.book Page 5 Wednesday, April 8, 2015 9:59 AM
Safety Warnings for Drills
 Use auxiliary handle(s), if supplied with the tool. Loss
of control can cause personal injury.
 Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
may contact hidden wiring or its own cord. Cutting ac-
cessory contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the operator an
electric shock.
 Use suitable detectors to determine if utility lines are
hidden in the work area or call the local utility company
for assistance. Contact with electric lines can lead to fire
and electric shock. Damaging a gas line can lead to explo-
sion. Penetrating a water line causes property damage or
may cause an electric shock.
 Switch off the power tool immediately when the tool in-
sert jams. Be prepared for high reaction torque that
can cause kickback. The tool insert jams when:
— the power tool is subject to overload or
— it becomes wedged in the workpiece.
 Hold the machine with a firm grip. High reaction torque
can briefly occur while driving in and loosening screws.
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
 Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for drilling in wood, metal, ceramic
and plastic. Machines with electronic control and right and
left rotation are also suitable for screwdriving and tapping.
Bosch Power Tools
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Key type drill chuck
2 Lock-on button for On/Off switch
3 On/Off switch
4 Rotational direction switch
5 Handle (insulated gripping surface)
6 Chuck key
7 Screwdriver bit*
8 Universal bit holder*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Rotary drill
Article number
Rated power input
Output power
No-load speed
Rated speed
Speed control
Right/left rotation
Chuck clamping range
Max. drilling dia.
– Steel
– Wood
– Aluminium
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Assembly
Changing the Tool (see figure A)
 Before any work on the machine itself, pull the mains
plug.
– Open the key type drill chuck 1 by turning until the tool can
be inserted. Insert the tool.
– Insert the chuck key 6 into the corresponding holes of the
key type drill chuck 1 and clamp the tool uniformly.
Screwdriver Tools (see figure B)
When working with screwdriver bits 7, a universal bit holder 8
should always be used. Use only screwdriver bits that fit the
screw head.
English | 5
GBM 350
3 601 AA9 5..
W 350
W 160
-1
min 0 –2800
-1
min 0 –2000


mm 1 –10
mm 10
mm 20
mm 13
kg 1.2
/II
1 609 92A 19C | (8.4.15)