Product Description And Specifications - Bosch GSB Professional 21-2 Notice Originale

OBJ_DOKU-26857-001.fm Page 14 Thursday, May 26, 2011 3:57 PM
14 | English

Product Description and Specifications

Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for impact drilling in brick, concrete
and stone as well as for drilling in wood, metal and plastic. Ma-
chines with electronic control and right/left rotation are also
suitable for screwdriving and thread-cutting.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Keyless chuck
2 "Drilling/Impact Drilling" selector switch
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are: Sound pressure level 95 dB(A); Sound power level 106 dB(A). Uncer-
tainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K determined
h
according to EN 60745:
Drilling into metal:
a
h
K
Impact drilling into concrete:
a
h
K
Screwdriving without impact:
a
h
K
Tapping:
a
h
K
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may signif-
icantly reduce the exposure level over the total working period.
2 609 932 659 | (26.5.11)
3 Thumbwheel for electronic speed preselection
(GSB 21-2 RCT)
4 "Drilling/screwdriving" selector switch (GSB 21-2 RCT)
5 Rotational direction switch
6 Lock-on button for On/Off switch
7 On/Off switch
8 Thumbwheel for speed preselection
9 Gear selector
10 Button for depth stop adjustment*
11 Auxiliary handle (insulated gripping surface)*
12 Depth stop*
13 Handle (insulated gripping surface)
14 Chuck key*
15 Key type drill chuck*
16 Screwdriver bit*
17 Universal bit holder*
18 Allen key **
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
**Commercially available (not included in the delivery scope)
3 601 ... A9C 0..
2
m/s 5.6
2
m/s 1.5
2
m/s 14.6
2
m/s 1.8
2
m/s
2
m/s
2
m/s
2
m/s
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2004/108/EC,
2006/42/EC.
A9C 5.. A9C 7..
A9C 6.. A9C 8..
5.6 5.4
1.5 1.5
14.6 15.7
1.8 2.2
– <2.5 <2.5
– 1.5 1.5
– <2.5 <2.5
– 1.5 1.5
Bosch Power Tools