Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard, level
surface. Allow a workout area of minimum 74" x 130" (190 cm x 330 cm).
Follow these basic points when you assemble your machine:
1. Read and understand the "Important Safety Instructions" before assembly.
2. Collect all the pieces necessary for each assembly step.
3. Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left
(counterclockwise) to loosen, unless instructed otherwise.
4. When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through
the holes.
5. The assembly requires 2 people.
Note: Some axles contain oil. Use caution to avoid staining clothes or carpet.
Patent Information
© 2009 Nautilus, Inc., All rights reserved
™ and ® indicate a trademark or registered trademark. Nautilus, Inc. (www.nautilus.com) trademarks include
NAUTILUS®, BOWFLEX®, STAIRMASTER®, SCHWINN® and UNIVERSAL® and respective logos.
Other trademarks are the property of their respective owners.
Para obtener este manual en Español Latino Americano vaya a:
http://support.nautilus.com.
Table of Contents
2
3
4
4
5
6
7
20
21
Before Assembly
This product may be covered by US and Foreign Patents and Patents Pending.
Guide de Montage et du Propriétaire
2 2 2
23
24
31
34
35
35
36
39
41
Publicité
Chapitres
Table des Matières
Dépannage
