Fitness Test; Calorie Goal - Nautilus U/R514 Mode D'emploi

Changing Resistance Levels
Push the Increase or Decrease buttons to change the resistance level at any time in a workout program.

Fitness Test

The Fitness Test measures the improvements of your physical fitness level. The test compares your power output (in Watts) to your
heart rate. As you become more fit, you will produce more power (Watts) at a given heart rate.
Note: The console must be able to read the heart rate information from the CHR sensors or HRM for the HRC
program to work correctly.
If you go to the HRC program from your User profile, the Target Heart Rate program uses your age and other user setup information
to set the Heart Rate Zone values for your workout. If you are a Guest User, you must enter your age and weight. The console
display then gives prompts for you to set up your workout:
1. Set the workout level: FIT (beginner) or GETTING FIT (advanced).
2. The workout starts from level 1 and increases as the timer counts up from 00:00, until your heart rate is
in the "Test Zone" (75% of your calculated maximum heart rate).
3. When you are in the Test Zone, the machine holds the Watts steady for 3 minutes. The timer counts
down from 3:00.
4. The console measures your heart rate and power output (Watts) to calculate your Fitness Score.
Note: Fitness Test scores should only be compared to your previous scores and not other users.
Over time, you will output more Watts of power at a specified Heart Rate. Compare your Fitness Scores to see your improvement.
Heart Rate Control (HRC) Program
The Heart Rate Control (HRC) program lets you set a heart rate goal for your workout. The program monitors your heart rate in beats
per minute (BPM) from the Contact Heart Rate (CHR) sensors on the machine or from a Heart Rate Monitor (HRM) chest strap.
Note: The console must be able to read the heart rate information from the CHR sensors or HRM for the HRC
program to work correctly.
If you go to the HRC program from your User profile, the Target Heart Rate program uses your age and other user setup information
to set the Heart Rate Zone values for your workout. If you are a Guest User, you must enter your age and weight. The console
display then gives prompts for you to set up your workout:
1. Set the workout level: FIT (beginner) or GETTING FIT (advanced).
2. Set the percentage of maximum heart rate: 60–70%, 70–80%, 80–90%.
Consult a physician before you start to exercise in the 80–90% heart rate zone.
3. Set the Time for the workout. (The default value is 10:00.)
For more detailed information about fitness zones, please refer to the fitness information on our website:
www.nautilus.com
Distance Goal
The Distance Goal Program lets you set the total Distance and Pacer Speed for your workout. If you are a Guest User, you must
enter your weight. The console display then gives prompts for you to set up your workout:
1. Enter the distance with the Increase/Decrease buttons (default is 20 mi/ 20 km). Push START/ENTER.
2. Enter the pacer speed with the Increase/Decrease buttons (default is 25 mph/ 25 km/h). Push
START/ENTER.
3. The exercise starts at level 1. To adjust the resistance, use the Increase/Decrease buttons.
4. The TIME display starts to count up from 00:00.

Calorie Goal

The Calorie Goal program lets you set the amount of calories that you want to burn during the workout. You can push the
15 15 15