Nautilus U/R514 Mode D'emploi page 18

Leveling the Bike
Levelers are found on each side of the Rear Stabilizer and on the Frame Rail. On the Rear Stabilizer,
turn the knob to adjust the stabilizer foot.
To adjust the leveler on the Frame Rail:
1. Loosen the upper locking nut.
2. Turn the leveler to adjust the height.
3. Tighten the upper locking nut to lock the leveler.
Make sure the bike is level and stable before you exercise.
Moving Your Bike
Upright
To move the upright bike, carefully pull the Handlebars
toward you while pushing the front of the bike downward.
Push the bike to the desired location.
NOTICE: Be careful when you move the bike. All abrupt motions can affect the computer operation.
13 mm
Recumbent
To move the recumbent bike, carefully lift the rear end of the
bike and slowly push the bike to the desired location.
18 18 18