Nice Road400 Instructions Et Avertissements Pour L'installation Et L'utilisation page 17

L1 Led
Off
On
It flashes
L2 Led
Off
On
It flashes
L3 Led
Off
On
It flashes
7.8 - Accessories: PS124
Road400 is also available with the PS124 - 1.2 Ah back-up battery with incorporated charger, as an optional accessory. To connect the back-up battery, see
Figure 28.
TABLE 22 - Led's on the control unit's buttons
Description
Correct during normal operation
Lit for 10 seconds means that the transmitter memorisation is being performed
• Function programming in progress
• Radio transmitter cancellation or diagnostics
Description
Indicates slow "motor speed" during normal operation
Indicates fast "motor speed" during normal operation
• Function programming in progress
• If it flashes together with L3, it means that it the user must carry out the gate opening and closing positions
recognition phase (refer to Paragraph "4.3 Recognition length of the leaf")
Description
Indicates "Automatic Closing" is active during normal operation
During normal operation the device indicates "Automatic Closing" is not active
• Function programming in progress
• If it flashes together with L2, it means that it the user must carry out the gate opening and closing positions
recognition phase (refer to Paragraph "4.3 Recognition length of the leaf")
English – 11