After Use - Invacare Aquatec Pure Bidet Manuel D'utilisation

1. Close the water supply by turning the shut off valve
clockwise.
2. Detach the PVC flexible hose A from the inlet adapter B.
3. Detach the strainer C from the inlet adapter with a
pointed object.
4. Thoroughly clean the strainer with a soft brush.
5. Reinsert the strainer on the inlet adapter.
6. Attach the PVC flexible hose to the inlet adapter.
7. Open shut off valve fully by turning counterclockwise.
Cleaning the nozzles
A
1. Press "CLEANSING / STOP" and "POWER SAVING" buttons
simultaneously on the control panel.
• The nozzle A comes out and stops.
2. Clean the nozzle manually with a soft brush.
3. Press "CLEANSING / STOP" button.
• The nozzle returns to its storage position and the
self cleaning function is automatically activated.
Disinfection
Information on recommended disinfectants
and methods can be found on https://vah-
online.de/en/for-users.
1. Wipe down all generally accessible surfaces with a soft
cloth and ordinary household disinfectant.
2. Allow the product to air-dry.
7.3 Freeze prevention during winter
1. Connect the power plug and check if the power unit
is on.
2. Press WATER on the remote control, until the water
temperature is set to "Low" or higher,
see 5.3 Using the shower toilet, page 8 .
7.4 Changing batteries of remote control
The battery life cycle depends on the frequency of use.
CAUTION!
Risk of remote control explosion
– Only use batteries of type AA (LR6) 1.5 V.
– Insert batteries according to the +/- indicator
in the remote control.
– Do not use old and new batteries together.
1. Change used batteries into new ones when "BATTERY
SIGN" LED blinks on the remote control, see Preparing
the remote control, page 6 .

8 After Use

8.1 Storage
IMPORTANT!
Risk of damage to the product
– Store the product indoors in a dry environment.
For temperature and humidity limits see chapter
10.3 Environmental Parameters, page 13.
– Do not store the product near heat sources.
– Keep the product out of direct sunlight.
1590625-F
IMPORTANT!
– If not in use for a long time, drain the water
tank completely, see chapter 4.4 Disassembly,
page 7 .
8.2 Reconditioning
This product is suitable for reuse. To recondition the product
for a new user, carry out the following actions:
• Inspection
• Cleaning and disinfection
For detailed information, see 7 Maintenance, page 10.
Make sure that the user manual is handed over with the
product.
If any damage or malfunction is detected, do not reuse the
product.
8.3 Disposal
WARNING!
Environmental Hazard
Device contains batteries.
This product may contain substances that could
be harmful to the environment if disposed of
in places (landfills) that are not appropriate
according to legislation.
– DO NOT dispose of batteries in normal
household waste.
– DO NOT throw batteries into a fire.
– Batteries MUST be taken to a proper disposal
site. The return is required by law and free of
charge.
– Only dispose of discharged batteries.
– Cover terminals of lithium batteries prior to
disposal.
– For information on the battery type see battery
label or chapter 10 Technical Data, page 12.
Be environmentally responsible and recycle this product
through your recycling facility at its end of life.
Disassemble the product and its components, so the different
materials can be separated and recycled individually.
The disposal and recycling of used products and packaging
must comply with the laws and regulations for waste handling
in each country. Contact your local waste management
company for information.
11