Before Initial Use; Fitting The Number Plate On The Bicycle Carrier; Fitting Of The Bracket On The Bicycle Carrier - EUFAB JAKE Mode D'emploi

Mounting / Fitting the Number Plate / Mounting of the bracket on the bicycle carrier

Before Initial Use

Fitting the Number Plate on the
Bicycle Carrier
20

Fitting of the bracket on the bicycle carrier

The U-bracket is delivered approx. 5 cm wider at
the lower end than the receptacles, i.e. the tubes
are not parallel when loose. During assembly,
the ends of the bracket must be strongly pressed
together.
The purpose of the pre-tensioning is, the U-bracket
can be folded down „rattle-free" for space-saving
stowage.
WARNING!
Personal injury or material damage possible
due to loss of the bicycles while driving.
A loose connection between the carrier and bracket
can lead to a loosening of the connection and loss
of the bicycles.
Check the bicycle carrier for secure and complete
4
mounting of the bracket on the carrier before
each trip.