hestan KRD Manuel D'utilisation Et D'entretien page 58

CARE & MAINTENANCE
LADDER RACKS / OVEN RACKS LADDER RACKS / OVEN RACKS
The oven racks and the left & right ladder racks can be removed from the oven for cleaning. DO
NOT clean these items in a self-cleaning oven.
EN
The racks may be cleaned with warm soapy water, or any number of commercial stainless steel
cleaners. Check to make sure the cleaners do not contain chlorine or chlorine compounds as these
are corrosive to stainless steel. Rinse thoroughly. If the racks do not slide easily after cleaning, apply
a small amount of food-safe or cooking oil to the slide rails.
SUGGESTED CLEANERS:
Hot water & mild detergent
Vinegar & water
Fantastik
Bon-Ami
Kleen King
SoftScrub
MEAT PROBE MEAT PROBE
DO NOT wash the meat probe in the dishwasher. Wash all parts of the probe by hand using warm
soapy water. Rinse and dry thoroughly.
SEALED BURNERS SEALED BURNERS
BURN HAZARD - To prevent burns, do not touch the burner heads or cooking grates when hot.
Allow to cool completely.
The burners can be disassembled for cleaning. Use only a small toothbrush to clean the burner ports
and igniter. DO NOT insert sharp objects or scratch the burner ports. After cleaning, ensure the
sealed burner heads are properly installed and seated on the burner base as shown below. There are
notches on the burner base and cross ring to help with alignment. The outer burner head features
a long slot on the top of the head which aligns with the spark igniter. Assembly of the single-flow
burner head is similar.
OUTER
BURNER
BEAUTY
56
©2021 Hestan Commercial Corporation
®
®
®
®
INNER
BURNER
HEAD
HEAD
RING
DUAL FLOW
BURNER
(CONTINUED)
CROSS
RING
BURNER
BASE
SINGLE FLOW
BURNER
BURNER
RING
BURNER
HEAD
BURNER
BASE
IGNITER