hestan KRD Manuel D'utilisation Et D'entretien page 24

SMART BURNER
TM
(CONTINUED)
PAIRING WITH THE COOKTOP PAIRING WITH THE COOKTOP
See the KNOB / COOKWARE SETUP section on page 23 for details.
EN
NON-CUE COOKWARE NON-CUE COOKWARE
Traditional cookware may be used on the Smart Burner TM , but only in Manual Mode. See
COOKWARE RECOMMENDATIONS on page 18 for details.
UPDATES UPDATES
You may need to update the firmware on your cooktop and cookware. The Smart Burner TM system
will routinely check for updates using the on-board WiFi connections if the system has been enabled.
This will ensure proper functionality as well as introduce new features when available. Proper setup
of the WiFi is required to enable this feature.
Hestan Cue cookware can be updated by downloading and connecting your cookware to the Hestan
Cue application. This will require the user to open the app periodically to connect to the pan and
check for updates. However, this is not required to use the cookware.
THERMOSTATIC COOKING CONTROL MODE THERMOSTATIC COOKING CONTROL MODE
Once cookware is connected, desired temperature can be set through the control knob interface.
Once temperature is reached, the smart system will modulate the flame to maintain set point. This
set point can be changed at any time by rotating the knob. See OPERATION - THERMOSTATIC
MODE on page 28 for details.
• Errors that occur while connected to the Smart Burner will appear on the knob display.
TM
22
©2021 Hestan Commercial Corporation