Table Des Matières; Electrical Grounding - hestan KRD Manuel D'utilisation Et D'entretien

TABLE OF CONTENTS
3 SAFETY PRECAUTIONS - BEFORE YOU BEGIN
8 MODEL NUMBERS
9 RATING LABEL
9 REGULATORY / CODE REQUIREMENTS
10 GETTING STARTED WITH YOUR APPLIANCE
17 USING THE RANGETOP
19 USING THE GRIDDLE
21 SMART BURNER TM
23 SMART BURNER TM
27 SMART BURNER
TM
28 SMART BURNER TM
30 USING THE OVEN
34 OVEN CONTROLS
54 ADDITIONAL ITEMS
54 CARE & MAINTENANCE
59 TROUBLESHOOTING GUIDE
60 PARTS LIST / SERVICE
61 COMPLIANCE INFORMATION
62 LIMITED WARRANTY
SAFETY PRECAUTIONS - BEFORE YOU BEGIN
When properly cared for, your Hestan appliance will provide safe, reliable service for many years.
When using this appliance, basic safety practices must be followed as outlined below.
INSTALLER: Please leave these Installation Instructions with the owner.
OWNER: Please retain these Installation Instructions for future reference.
This range is designed for residential use only. It is NOT designed for installation in manufactured
(mobile) homes or recreational park trailers. Do NOT install this range outdoors.
ELECTRICAL SHOCK HAZARD ELECTRICAL SHOCK HAZARD
Disconnect power before installing or servicing appliance. Before turning
power ON, be sure all controls are in the OFF position. Failure to do so can
result in electrical shock or death.

ELECTRICAL GROUNDING

ELECTRICAL GROUNDING
This appliance must be grounded. Grounding reduces the risk of electric shock
in the event of a short circuit. Read the ELECTRICAL CONNECTIONS section of the Installation
Manual for complete instructions.
This appliance is equipped with a 4-prong grounding plug for your protection against shock hazard
and should be directly plugged into a properly grounded receptacle. Do not cut or remove the
grounding prong from this plug.
(SOME MODELS)
- SETUP
- MANUAL MODE
- THERMOSTATIC MODE
© 2021 Hestan Commercial Corporation
EN
3