Functions - Giorgio Bormac 8+ Série Manuel D'utilisation

Use only the USB cable supplied with each instrument.
•
• Start the program and then turn on the instrument.
Wait for the connection to be established (the connection data are displayed at the bottom left of the
•
display).

• Functions

• Download: the data stored in the instrument memory are downloaded to a PC and displayed in the
table for processing;
M+: instant acquisition of a value (is equivalent to manual datalogger);
•
• Logger: automatic acquisition with set frequency;
Clear: emptying of the data in the table. If the password is active, it will be requested;
•
• Export to Excel / Export to PDF: export to PDF or to Excel of all the data in the table, of graphs, of
calibration report and device information;
Save to file / Open from file: saving the data in the table and possibility to reload them in order to
•
process or continue recording;
Select language: set the interface language (Eng – Ita – Deu – Esp – Fra – Cze);
•
• Table / Chart: display mode of the acquired data. The graphs are divided by parameter and can be
printed separately.
Functions
UM Serie 880 EN rev.2 30.07.2020
Display of data aquired in the table or chart
Connection data and device information
34
Reproduction of the
instrumental display
for real-time
measurementseprod
Calibration report
for each parameters
Automatic
data-logger
EN