Example 1 Data Logger Mode; Example 2 Data Logger Mode - Giorgio Bormac 8+ Série Manuel D'utilisation

PC The recorded data is directly sent to the PC through USB connection and processed using the
•
appropriate software DataLink+.
P5.2 Data logging type
Enter this menu to select the acquisition mode data.
• Manual : The data is acquired or printed only when the user presses the
• Seconds / Minutes / Hours
range. Press key to start and end the registration.
P5.3 Print format
Enter this menu to select which information to print in the header in a data logger printer mode.
• For 8+ Series:
• Simple: progressive registration number / date and hour / value, UM and temperature.
• Complete: device model / report last cal / progressive registration number / date and hour /
value, UM and temperature.
For 80+ Series:
•
• Simple: progressive registration number /
ID sample / date and hour / value, UM and
temperature.
• Complete: model and sn of the device /
date last cal / IDs / progressive registration
number / date and hour / value, UM and
temperature.
• GLP: model and sn of the device/ report last
cal / IDs / progressive registration number /
date and hour
temperature.

• Example 1 Data Logger mode

Example for automatic pH recording on internal memory every 2 minutes.
• Enter in Data Logger setup mode.
In P5.1 select Memory.
•
• In P5.2 select Minutes, with directional keys set "2" and confirm by pressing
key to return in measurement mode and activate MEAS pH screen. In the upper band you
• Press
can find icons - saving in internal memory - and
Press to start the registration,
•
progress. The number beside
• Press again key to end the recording.
Note: automatic recording is suspended when you change the measurement parameter or enter the setup
menu.
Note2: recording and printing in simultaneous pH/Cond screen occur for both the values.

• Example 2 Data Logger mode

Example for manual printing of Cond value with date of last calibration.
Enter in Data Logger setup mode.
•
• In P5.1 select Printer.
In P5.2 select Man.
•
• In P5.3 select Complete.
UM Serie 880 EN rev.2 30.07.2020
: By using the arrow keys set an automatic data acquisition frequency
/ value, UM and
icon starts blinking, meaning that the memorisation is in
icon indicates how many data has been saved.
30
key.
key.
- automatic data acquisition -.
EN