Siemens SITRANS Probe LR Manuel D'utilisation page 11

Security: (P000: Lock)
Value
Value stored in P069
other
* Factory setting for P069 is 1954: after a new value is entered and accepted, it becomes the
default setting.
Activating SITRANS Probe LR
Power up the instrument. SITRANS Probe LR starts in RUN mode.
Notes:
• Keep infrared devices such as laptops, cell phones, and PDAs, away from
SITRANS Probe LR to prevent inadvertent operation.
• The following instructions apply when using the Hand Programmer.
• Do not use the Hand Programmer at the same time as SIMATIC PDM, or erratic operation
may result.
• You do not need to key in initial zeros when entering a parameter number: for example,
for P005, key in 5.
Accessing a parameter
1. Press PROGRAM
PROGRAM mode.
2. Either use the ARROW keys
different parameter, or:
3. Press DISPLAY
field. (The current parameter value remains visible.)
4. Key in the desired parameter number followed by
ENTER .
For example: press
5. The LCD displays the new parameter number and
value.
7ML19985QP81
* Lock off: programming permitted
Lock activated: no changes permitted
then DISPLAY , to activate
to scroll to a
to open the Parameter Number
.
SITRANS Probe LR – QUICK START MANUAL
Description
PROGRAM Icon
Parameter Number
Parameter Value
current value
Page EN-9