Internal Units; Technical Characteristics Colour Monitor Art. 5900 - Comelit MT KIT 13 Manuel Technique

GROUP S.P.A.

INTERNAL UNITS

Art. 5900
12
11
10
9
3
2
1
14
13

Technical characteristics Colour monitor Art. 5900

Maestro series wall-mounting monitor 185x185x38 mm, with 5,6ʼʼ
colour screen. The monitor can also be installed on a desktop by
means of special support Art. 5912.
1 Door request exit button
2 Pushbutton to activate and deactivate the intercom after a call
( ). Once enabled (blue LED on) the conversation is in
automatic Speak/Listen mode.
3 Privacy service . Privacy service means the exclusion of the
call from the external unit or switchboard; the activation of the
Privacy function is signalled by the red LED lighting up.
4 Default pushbutton 1 for Switchboard call function. (A)
5 Default pushbutton 2 for Self-ignition function. (A)
6 Default pushbutton 3 for Actuator function. (A)
7 Default pushbutton 4 for manual SPEAK/LISTEN function:
when the monitor is in audio mode, press the pushbutton to
speak and release it to listen. (A)
8 Factory setting button 5, programmed to activate the Doctor
function. (A) (B)
9 Yellow LED indicating door open or providing other signals
(see variant MK/NC, pag. 77).
10 Blue LED indicating audio function (the audio function is active
when the LED is on).
11 Green indicator LED, during communication it indicates the
status of the conversation:
- off : sounds from the external unit or from another intercom
device are heard on this monitor;
- on : sounds from this monitor are heard on the external unit or
on another intercom device.
12 Red indicator LED signalling internal extension engaged,
Privacy or Doctor services active.
13 Colour intensity adjustment.
14 Brightness control.
15 Ringtone volume adjustment.
16 Audio volume adjustment.
17 Hooking bracket.
24
MT KIT 13
4
5
8
7
6
15
16
17
.
(A) Standard pushbutton available for different functions as listed
on page 34
(B) Freeable pushbutton
Up to a max. of 3 monitors can be used in the same residence unit.
Art. 5914KC
3
4
5
Monitor fixing bracket
The fixing bracket Art. 5914KC enables wall-mounting of the
monitor or installation using the desk base Art. 5912 (for more
information see page 25).
Technical characteristics
1 Monitor-bracket connector.
2 Terminal block for system connection:
CFP CFP Local floor call input (see variant C pag. 76).
+ - Terminals for connection to Art. 1205/B or 1212/B.
L L Bus line connection terminals.
P5 C5 Contacts for pushbutton 5 used for various purposes (see
variant MK/PC pag. 77).
To use the terminals P5 C5 as free contacts, move CV3 and
CV4 to the C.NO position.
+S -S Terminals for call repetition device (see variant SB2/AAK
pag. 75).
+LED -LED LED input terminals for various uses (see variant
MK/NC pag. 77).
3 JP1 Jumper to set bracket as Main (P) or Secondary (S) (see
pag. 33).
4 S1 User code programming microswitches.
5 S2 Microswitches for various setting procedures.
6 CV3 CV4 Jumper for freeing pushbutton 5 (contact C.NO. 24V-
100mA max).
7 CV5 Jumper for closing video.
8 TM1 Microphone volume.
9 TM2 Loudspeaker volume.
10 TM3 Microphone sensitivity for switching intercom channels
(factory-set to optimal position).
2
7
8
10
9
1
6