Style Door-Entry Phone Art. 2608 - Comelit MT KIT 13 Manuel Technique

Style door-entry phone Art. 2608

-
M I
4
1
2
Basic door-entry phone with 2 pushbuttons as standard.
Cannot be used for the intercom function.
The door-entry phone must always be mounted using Art. 1214/2C
as shown in the MK/DC connection diagram on page 72.
1. Door request exit button
2. Pushbutton P1 switchboard call / generic actuator / pushbutton
for various uses present on terminal block (P1 C1).
3. 3-position ringtone/Privacy service selector:
High position: Max. ringtone volume.
Middle position: Medium ringtone volume.
Low position: Privacy function activation
(Privacy service means exclusion of the call ringtone from the
external unit and switchboard; activation of this function is
signalled by a red indicator appearing in the top right-hand
corner).
4. Privacy function indicator.
5. System connection terminals:
L L bus line connection.
CFP CFP floor door call input.
P1 C1 terminals for pushbutton P1 C. NO. 24V 100mA
dedicated to various services (remove CV1 and CV2).
S+ S- Terminals for call repetition device.
6. JP1 jumper for selecting switchboard call (position C) / Generic
actuator (position A) function of pushbutton P1 (see figure
opposite).
7. CV1 CV2 jumper to be removed for potential-free C.NO. contact
on pushbutton P1.
8. Dip switch for setting user code (see table on page 33).
9. Microphone volume control trimmer.
Clean using a damph clot. Do not use alcohol or other aggressive
products.
+
C
3
.
MT KIT 13
JP1
9
8
5
7
6
27
MT KIT 13