Style Door-Entry Phone Art. 2628 - Comelit MT KIT 13 Manuel Technique

GROUP S.P.A.

Style door-entry phone Art. 2628

8
2
1
3
4
3
6
5 6
8
7
7
9
Elegance door-entry phone with additional functions and pushbuttons.
Cannot be used for the intercom function.
The door-entry phone must always be mounted using Art. 1214/2C
as shown in the MK/DC connection diagram on page 72.
Important: for correct setting of the Article during installation inside
a MAESTRO KIT system, refer to the note below.
1. 3-position ringtone/Privacy service selector:
High position: Max. ringtone volume.
Middle position: Medium ringtone volume.
Low position: Privacy function activation
(Privacy service means exclusion of the call ringtone from
the external unit and switchboard; activation of the Privacy
function is signalled by a red indicator appearing in the top
right-hand corner).
2. Privacy function indicator.
3. Pushbutton 1 available as standard for generic actuator
function.
4. Door request exit button
5. Pushbutton 2 available as standard for switchboard call
function.
6. Pushbutton 3 for various uses present on terminal block (P3 C3).
7. Optional pushbuttons C. NO. or LEDs (MAX 3) for additional
functions. (A)
8. Interchangeable cover Fig. 7 page 26.
9. Pushbutton memo label for indicating the door-entry phone
pushbutton functions can be indicated (to be applied under the
interchangeable cover as shown in Fig. 7 page 26).
10. Telephone handset (lift the handset to start communication).
(A) Pushbutton available with optional card Art. 1626.
Display LED available with optional card Art. 1627.
WARNING!
TO USE DOOR-ENTRY PHONE ART. 2628 IN MAESTRO KIT SYSTEMS, SELECTOR SW3 MUST
BE MOVED TO POSITION S1.
28
MT KIT 13
1
2
4
5
7
10
9
.
11. System connection terminals:
L L bus line connection.
CFP CFP floor door call input.
P3 C3 terminals for pushbutton P3 C. NO. 24V 100mA
dedicated to various services.
S+ S- Terminals for call repetition device.
12. SW3 Jumper for selection of Simplebus 1 and Simplebus 2
mode.
13. Dip switch U2 for setting user code (see table on page 33).
14. Microphone volume control trimmer.
Clean using a damp cloth. Do not use alcohol or other aggressive
products.
14
13
11
12
SW3